| Salt spray Chamber (Economy Model) |
 |
Standards |
JIS Z2371 |
DIN 50021 |
ASTM B117 |
| |
IS: 5528 |
IS: 6910 |
ISO: 3768 |
|
The FEC Salt spray chamber Tester has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions.
Double walled. (Stainless Steel 316 Inside & Outside G.I.Duly Power Coated)
Specially designed inert material atomizers of standard orifice produce the salt spray with air from a motorized compressor of suitable capacity. The air pressure for spraying and agitation of salt solution can be adjusted by means of precision control valves. A separate control panel fitted with all electrical, pressure gauges, temps. Indicator, hour meter etc. has been provided for easy operation of the equipment. |
Features: |
Work Space |
Rectangular Inside Size: 900x750x600 mm |
Temperature Range |
Ambient to 60 degree Celsius. Temp. Requirement 35±20C |
Temperature Accuracy |
+/- 1 degree Celsius. |
Temperature Control |
Solid State Digital Programmable Temperature Controller cum Indicator |
Material |
Stainless Steel Main body grade 316 Inside & Out side G.I.Powder coated with transparent lid
(Toughened glass) to observe sample under test. |
Air Regulator |
Moisture cum oil filter and air regulator ranging from 0 to 30 psi is provided |
Pressure Gauge |
A calibrated pressure gauge is provided for measuring inlet air pressure |
Atomizer |
A state of the art zero choke inert material atomizer is provided for reliable atomizing |
Solution Storage |
A temperature controlled non- corrosive storage tank for solution storage is provided with
Immersion heater fitted in it. |
Tests |
Different types of tests like salt spray, acetic spray, alcoholic spray and any other chemical sprays with different % of salt concentration as ASTM/ISS/IS9000/ |
Panel |
A separate user friendly panel is provided with the following controls :
- Solid state Digital programmable Temperature indicator cum controllers with auto- cut off facility for the main chamber and reservoir.
- Digital Preset Timer with Memory backup and automatic shut off after pre- set duration for setting test duration up to 999 Hrs.
- Imported Hour meter for recording total (cumulative) hours of chamber run since installation / difference time log.
- Light indicating ON/OFF Mains..
- Mounted Pressure gauge, Regulator valve and air filter.
|
Electrical Requirement |
Single phase 220 Volt 50Hz 3KW approx. |
|
|
Air Saturation system available as an optional accessory. |
| Salt spray Chamber (Deluxe Model) |
 |
Standards |
JIS Z2371 |
DIN 50021 |
ASTM B117 |
| |
IS: 5528 |
IS: 6910 |
ISO: 3768 |
|
The FEC Salt spray chamber Tester has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions.
Double walled. (Stainless Steel 316 Inside & Outside Stainless Steel)
Specially designed inert material atomizers of standard orifice produce the salt spray with air from a motorized compressor of suitable capacity. The air pressure for spraying and agitation of salt solution can be adjusted by means of precision control valves. A separate control panel fitted with all electrical, pressure gauges, temps. Indicator, hour meter etc. has been provided for easy operation of the equipment. |
Features: |
Work Space |
Rectangular Inside Size: 900x750x600 mm |
Temperature Range |
Ambient to 60 degree Celsius. Temp. Requirement 35±20C |
Temperature Accuracy |
+/- 1 degree Celsius. |
Temperature Control |
Solid State Digital Programmable Temperature Controller cum Indicator |
Material |
Stainless Steel Main body grade 316 Inside & Out side G.I.Powder coated with transparent lid
(Toughened glass) to observe sample under test. |
Air Regulator |
Moisture cum oil filter and air regulator ranging from 0 to 30 psi is provided |
Pressure Gauge |
A calibrated pressure gauge is provided for measuring inlet air pressure |
Atomizer |
A state of the art zero choke inert material atomizer is provided for reliable atomizing |
Solution Storage |
A temperature controlled non- corrosive storage tank for solution storage is provided with
Immersion heater fitted in it. |
Tests |
Different types of tests like salt spray, acetic spray, alcoholic spray and any other chemical sprays with different % of salt concentration as ASTM/ISS/IS9000/ |
Panel |
A separate user friendly panel is provided with the following controls :
- Solid state Digital programmable Temperature indicator cum controllers with auto- cut off facility for the main chamber and reservoir.
- Digital Preset Timer with Memory backup and automatic shut off after pre- set duration for setting test duration up to 999 Hrs.
- Imported Hour meter for recording total (cumulative) hours of chamber run since installation / difference time log.
- Light indicating ON/OFF Mains..
- Mounted Pressure gauge, Regulator valve and air filter.
|
Electrical Requirement |
Single phase 220 Volt 50Hz 3KW approx. |
Humidity Indicator |
An R/H Indicator is provided in the main panel. |
|
|
Air Saturation system available as an optional accessory. |
Exclusive Spares Supplied Complimentary |
- Reservoir : with Stand
- Lab Grade Salt for Solution For preparing initial Salt Solution
- Sample Hanging Rods : 2 Nos
- Sample Holding Thread : 2 meters for hanging samples
- Cleaning Scrub : Chemois for effective cleaning of chamber
|
- Dis
tillation Unit : For lab grade production of Distilled water
- PVC Pipe : 1M
- Instruction Manual
- Jet Cleaning Pin (Wire 0.6mm)
- Dust Cover for Panel
- pH Meter: Handy Type Model
- Calibration Certificates
|
|
NO. |
|
DELUXE MODEL |
ECONOMY MODEL |
1. |
Construction |
Outside
Stainless Steel |
Outside
G.I. duly Powder Coated |
2. |
Frame Structure |
Stainless
Steel Angles Used |
Mild Steel Angles Used |
3. |
pH Meter- To check ph of test solution |
Yes |
No |
4. |
Distillation Unit (4L/Hr. capacity)
-For lab grade distilled water to be used in chamber |
Yes |
No |
5. |
Fog Collection Unit- To check Calibration of the chamber (Fog Collection Method) |
Yes |
No |
6. |
Humidity Indicator- To check R/H in the chamber |
Yes |
No |
|
